¥19.38 Pinduoduo FC-6638D folding mini fan teardown: confirmed 1503 brushless motor, 5-blade prop, 10 speeds on an LED display, about 50g thrust; unmarked cells in parallel with no BMS, so an AWithZ welder swaps in two high-capacity cells + a BMS for 5000mAh
A follower recommended a so-called brushless “monster” mini fan, ¥19.38 paid (model FC-6638D, rated 1800mAh, 91×35×191mm, Type-C charging, folding). Features: about 10 speeds, a small LED digit display, plenty of airflow — about 50 grams of thrust on top speed, folds for carrying. Opened up: the main connections use plugs, easy to repair; lots of motor wires, confirmed brushless, the motor should be a 1503, 5-blade prop. The cells are dreadful: no capacity rating, no markings at all, negatives joined so they’re in parallel, and the unit has no BMS. Since it’s open anyway, he swaps in two high-capacity cells and adds a BMS against over-charge and over-discharge; welding with the AWithZ welder is handy, and it’s bumped straight to 5000mAh — over twice the original. Verdict: excellent value for ¥20, he suspects the seller is running a charity; a controller board alone for a home-built 1S brushless fan costs ¥20-plus online. 1368 comments: many say later batches cut corners and only have one cell, and the price went up; someone at the same shop plans to fit 2 EVE 33V cells; someone shows a fan with 800-plus grams of thrust.
Teardown of a ¥19.38 Pinduoduo FC-6638D folding mini fan: confirmed a 1503 brushless motor, 5-blade prop, 10 speeds on a 7-segment display, about 50 g of thrust; the cells are unlabelled, in parallel, with no BMS — swapped for two high-capacity cells plus a BMS on an AWithZ welder, now 5000mAh
A follower recommended a so-called brushless turbo mini fan, ¥19.38 paid (model FC-6638D, rated 1800mAh, 91×35×191mm, Type-C charging, folding). Features: about 10 speeds, a small 7-segment display, plenty of airflow, about 50 g of thrust at the top speed, folds for easy carrying. Inside: the main connections use plugs, easy to service; lots of motor wires, confirmed brushless, the motor should be a 1503, 5-blade prop. The cells are pretty poor: no capacity rating, no markings at all, negatives joined so they are in parallel, and the unit has no BMS. Since it is open anyway, swap in two high-capacity cells and add a BMS against over-charge and over-discharge, welded on the AWithZ welder, quite handy, straight up to 5000mAh, twice the original. Verdict: great value for ¥20, suspect the seller is running a charity — a controller board alone for a home-made 1S brushless fan costs ¥20-odd online. 1368 comments: many report later batches cut corners with only one cell, and a price rise; someone from the same shop plans to fit 2 EVE 33V cells; someone shows a fan with 800-odd grams of thrust.
We only use essential cookies, plus one performance measurement you can turn off. Cookie Policy
EssentialSign-in, language, theme and similar; the site cannot work properly without them
Always on
FunctionalPlayback history and filter preferences, stored only in your browser
Always on
PerformanceAnonymously reports page load times so we can speed up the site; not linked to your account or shared with third parties
Official stores
Go to our official stores on third-party platforms
AWithZ · Product feedback & suggestions
Ran into a problem? Have an idea for improvement? Tell us. We read every piece of feedback carefully. Valid feedback earns points, redeemable for accessories / coupons.
Thanks for your feedback!
We'll review it within 1–5 business days. If you left an email, valid feedback earns points redeemable for accessories / coupons. If we need to follow up, we'll contact you at the email you left.
We'll review it and send the result to your inbox. Abusive reports may be restricted.
Before you browse
WeldWorld is an open platform for user sharing; content does not represent official advice.
Improper battery handling can cause fire, explosion, chemical burns and serious injury. Read the full AWithZ Safety & Usage Guidelines before any lithium battery assembly, spot welding or testing, and before using the community.
Community content is personal experience, not verified by AWithZ; where it conflicts with official documents, the official documents prevail.
Never apply someone else's settings directly; always start at a low level and test on scrap.
Before copying any procedure, go through the self-check list in Part 3 of the guidelines.