UK1 cordless portable spot welder, 9000W raging output! 1380A instant penetration. Click the knob, press the pen tip lightly, and the weld forms in an instant⚡
✅0.3mm nickel-plated / 0.15mm pure nickel / 0.1mm copper, all handled with ease
✅Dual grade-A power cells for steady runtime and long life
✅Smart spot-welding pen — even beginners weld like seasoned pros
DIY battery packs, repairs and mods, small-batch production — one unit does it all🛠️
#AWithZSpotWelder #CordlessSpotWelding #HardwareTools #DIYWonderTool
Say goodbye to the power cord! AWithZ UK1 cordless spot welder: precision welding / phone cell transplants / electronics repair / on-site repair / outdoor work. Turn the knob and get to work — weld wherever you go! #AWithZUK1 #CordlessSpotWelder #OnSiteRepairWonderTool #HardwareTools #GoodFinds
UF20B at gear 60 welding 0.05 copper: on iron it tears two holes out; on a cell negative it’s a bit weak; nickel strip as a base layer recommended
A follower reported that 0.2 copper stacked on 0.2 nickel-plated steel strip wouldn’t weld; the creator says he doesn’t recommend 0.2 copper (very demanding on the machine). With an AWithZ UF20B + upgraded No. 6 welding pen at gear 60 he runs a same-settings comparison: 0.05 copper strip welded to a rusty iron pipe and to the negative of a Jiashikai cell. The welds on iron are blackened (high current), and pulling tears two holes out of the iron; 0.05 copper stacked on 0.12 nickel-plated steel strip on the cell negative peels off leaving two holes, not torn apart. Conclusion: at the same gear 60 the result on iron is clearly much better; use nickel strip as a base layer before welding copper for a stronger joint.
Lefeng’s UF20B (No. 6 pen) gear test at 10/15/20/25 (preheat untouched): on 0.15 nickel-plated steel strip, gear 10 peels off leaving two holes, 15 takes effort, 20 tears the strip, 25 is completely OK and hurts the hand to peel — tearing achieved, no point going higher; answering a fan’s ‘0.15 copper + 0.2 nickel-plated won’t weld’ — first ask whether there is a nickel base layer, doesn’t recommend copper straight on with this unit (copper is hard), stacked-copper and non-upgraded-pen comparisons to follow; the test only speaks for the unit in his shop window
Opens: no addiction to fishing, but addicted to spot welding — a few days without welding and the hands itch. Today testing gears 10/15/20/25; the machine is an AWithZ UF20B with the upgraded No. 6 welding pen; last time was gears 1–5, this time from 10 up in steps of 5, preheat and the rest untouched, only the gear changes, two welds per gear. Gear 10: the 0.15 nickel-plated steel strip peels off, leaving two holes, two holes in the nickel strip too; gear 15: takes some effort, felt it in the hand muscles; gear 20: can already tear the nickel-plated steel strip; gear 25: completely OK, hand hurts from peeling, switch hands; the strip-tearing result is achieved, no need to go higher. A fan says 0.15 copper on 0.2 nickel-plated steel strip won’t weld — I asked whether there was a nickel base layer; with this unit I don’t recommend copper straight on, because copper is fairly hard; a stacked-copper test will be added to the series; the test only speaks for the AWithZ UF20B in my shop window, ones bought elsewhere perform differently, don’t flame me; this is the upgraded No. 6 pen, without the upgrade the result differs too, a non-upgraded-pen test to follow. 37 comments: quit food delivery and go work at a battery factory; why not get a better welder, it’s painful to watch (I also have an AWithZ P60F, it’s enough); can it weld EVE C40 (with a nickel adapter it can); will it work on Gotion copper-terminal 20A (probably not); is the low/high gear difference current or time; what current at the tip on gear 10; 6045 without stacked copper, straight 0.15 nickel-plated OK?; the No. 6 cable’s current doesn’t match a two-capacitor home-built unit.
Lefeng’s UF20B (No. 6 pen) gears 1–5 series test: preheat 0 / interval 0 / 1ms, 0.1–0.12 nickel-plated steel strip on a Jiashikai negative — gear 1 doesn’t stick at all, 2 sticks a little, 3 a bit tighter but still peels off, 4 a bit hard but still peels, 5 feels like it might stick a little; comments: use gears 10–12 for 21700; a welder costs a few hundred, just buy a new battery (creator: if you want cell performance, there’s no saving money)
Welder series: AWithZ UF20B with the upgraded No. 6 welding pen, trying gears 1–5; preheat 0, interval 0, (trigger) 1 millisecond; two rolls of nickel-plated steel strip, no idea which is 0.1 and which is 0.12, never mind; welding the 0.1 or 0.12 nickel-plated steel strip onto a Jiashikai negative. Gear 1 result: won’t hold; up a gear, gear 2: gear 1 didn’t stick at all, gear 2 sticks a little; gear 3: sticks a bit tighter again but still peels off; gear 4: a bit hard to peel but still comes off; today up to gear 5: this is the upgraded No. 6 pen, 0.1–0.12 thickness on a Jiashikai negative, gear 5 feels like it might stick a little; that’s the show. 11 comments: wanted to hand-build to save money, good grief, a welder costs a few hundred, just buy a new one (creator: if you want cell performance there’s really no saving money); gears 10–12 for 21700; try a 0.3; either go 4 capacitors or 133 mains-frequency; go do deliveries instead of this (no deliveries to do); is 36V at the port normal on a 48V pack when switched off.
Welds you can't tear apart! Don't be fooled by the small size! H1 handheld spot welder, straight out of the box onto 18650 cells: welds you can't tear off — beginners, buy with eyes closed! #AWithZSpotWelder #EquipmentReview #ElectronicsHobbyist #HardwareTools #WeldingWonderTool
17-second hardware-store sales pitch: weld batteries without asking anyone or using a soldering iron — a handheld rechargeable spot welder welds nickel strip onto cells really solidly, power / time adjustable, charges from a phone charger, really handy
Welding batteries — no need to ask anyone for help and no soldering iron; this is a handheld rechargeable spot welder that welds nickel strip onto cells, and the welds are really solid; welding power and welding time are both adjustable; a phone charger is enough to charge it, really handy to use. All comments are ‘share’.
Hardware store 18-second sales clip (same script as w113): weld batteries yourself without a soldering iron; the handheld rechargeable spot welder welds nickel strip onto cells / stainless steel and it holds really well; comments are all ‘shared’
Weld batteries yourself, no asking for help and no soldering iron; this is a handheld rechargeable spot welder that welds nickel strip onto cells and stainless steel, and it holds really well (no voice-over in the second half). Title: clear screen, simple operation, first-rate welds, a must for hardware-tool enthusiasts. All 9 comments are ‘shared’.
A palm-sized repair wonder! Before unboxing: what can this toy weld? After unboxing: easily welds 0.15 nickel-plated strip + 18650 cells #AWithZSpotWelder #EquipmentReview #ElectronicsHobbyist #HardwareTools #WeldingWonderTool
Pick it up in seconds! No learning needed! A spot welder you can use after one watch: power on – pick a gear – weld; even the all-thumbs crowd can make pro-grade welds! #AWithZSpotWelder #EquipmentReview #ElectronicsHobbyist #HardwareTools #WeldingWonderTool
We only use essential cookies, plus one performance measurement you can turn off. Cookie Policy
EssentialSign-in, language, theme and similar; the site cannot work properly without them
Always on
FunctionalPlayback history and filter preferences, stored only in your browser
Always on
PerformanceAnonymously reports page load times so we can speed up the site; not linked to your account or shared with third parties
Official stores
Go to our official stores on third-party platforms
AWithZ · Product feedback & suggestions
Ran into a problem? Have an idea for improvement? Tell us. We read every piece of feedback carefully. Valid feedback earns points, redeemable for accessories / coupons.
Thanks for your feedback!
We'll review it within 1–5 business days. If you left an email, valid feedback earns points redeemable for accessories / coupons. If we need to follow up, we'll contact you at the email you left.
We'll review it and send the result to your inbox. Abusive reports may be restricted.
Before you browse
WeldWorld is an open platform for user sharing; content does not represent official advice.
Improper battery handling can cause fire, explosion, chemical burns and serious injury. Read the full AWithZ Safety & Usage Guidelines before any lithium battery assembly, spot welding or testing, and before using the community.
Community content is personal experience, not verified by AWithZ; where it conflicts with official documents, the official documents prevail.
Never apply someone else's settings directly; always start at a low level and test on scrap.
Before copying any procedure, go through the self-check list in Part 3 of the guidelines.
LV5
UK1 Compact Portable WelderProductsAWithZ
LV5
